Mehlbeerenstr. 4,  82024 Taufkirchen
Phone: +49 89 6661611-0,  Fax: -100

Eddy Current Probes

Eddy current sensors detect the distance or the change to metal objects without contact, dynamically and extremely accurately. The TX electronics which are specially adapted to the respective sensor calculate an analog output signal proportional to the distance. In addition, there is a USB and CAN interface for reading the data. The eddylab software developed by WayCon is the perfect complement to the TX series with its 3 functional areas (oscilloscope, FFT analysis, data logger).

TX Series, high precision measurement

Range0.5 - 10 mm
Linearity max.±0.15 %
Resolution0.03 µm
Dynamic 124 kS/s
Protection class max.IP68, (temp. +185 °C)
Output 0...10 V, 0...5 V, ±5 V, 0...20 mA, 4...20 mA,
USB, CAN
DownloadData sheet | CAD-Data

IC Series, low cost with integrated electronics

Ranges2, 3, 8 mm
Linearity max.±60 µm
Resolution1 µm
Dynamic 200...500 Hz (±3 dB)
Protection class max.IP67
Output 4...20 mA, 0...10 V, 0...20 mA, 1...9 V
DownloadData sheet | CAD-data

eddylab software

The powerful windows software is available in three different versions: Lite, Standard and Reference. eddylab is used in conjunction with the TX-Driver, an eddy current sensor and a digital gauge for calibration.

eddylab Lite is delivered with every eddy current sensor.

An overview of the eddylab versions and their respective functionality is given in the next table.

  
 

                   

eddylab Manual           CAN-Bus


Further information can be found in the datasheet of the TX-System.